How to set up a Cronus Zen for NBA 2K

Use a data-capable USB cable, the current official Zen software, your controller, and the cable you will use between the Zen and console. Charge the controller before starting.

Game and console rules still apply. A hardware accessory does not prevent a publisher or platform from enforcing its terms or reviewing gameplay behavior.

1. 1Update the Zen firmware using the current official firmware tool. Let the update finish before disconnecting anything.
2. 2Connect the Zen's programming port to your computer with a data-capable USB cable, then open the current Zen software.
3. 3Open your script file, compile it if the software requires that step, and flash or program it to a numbered device slot.
4. 4Disconnect the programming cable when programming is complete. Connect the controller to the Zen, then connect the Zen to the console in that order.
5. 5Use the device controls to select the same numbered slot that received the script. Confirm the slot is active on the Zen display.
6. 6Test controls and timing in MyCourt before entering an online game. If inputs are wrong or inconsistent, stop and correct the setup first.

• The controller is connected through the Zen, not directly to the console.
• The displayed slot matches the slot programmed on the computer.
• Movement, menus, and normal controller inputs work in MyCourt.
• Your timing values were tested after the latest gameplay update.

Note: Do not treat a successful MyCourt test as a safety guarantee. Use remains subject to game and platform terms.